- High Oder Blocking Capabilities
- Excellent Absorption – Alginates from Seaweed
- May Be Used as a Primer or Top Coat
- Easy to Apply Using Any Method (roller, brush, sprayer)
- Eco-friendly with very Low VOC’s
- Fire Resistant
- Mold and Mildew Resistant
- High Quality Paint – Provides good hiding
- Excellent Adhesion
- High Coverage Rate
- Easy Clean-up
- Tintable up to 4 oz. using a universal or water based colorant
- Smooth Finish
Note: Dry film preservatives offering excellent, long lasting protection against microorganisms, broad range mildew, algae and fungi that can grow on and potentially damage the coating. No added VOC.
Use to seal, block, absorb and capture existing odors and fumes on various surfaces as a self-priming interior paint or topcoat. Ideal for home owners, apartment/multi-family, hotels, offices, retail/commercial/industrial facilities and schools. Perfect for restorations by home owners, multi-family, land lords, property managers, restoration professionals, maintenance and cleaning crews when preparing a property for renting or resale.
300-400 sf/gl depending on surface texture, porosity and application method. Note: Recommended film thickness for single coat is 4-6 mil wet for typical application. Additional layers may be required for stronger odors/fumes.
Drying Times (@70-77°F, 50% RH)
- To the Touch – 2-4 Hours
- To Recoat/Topcoat – 4 Hours
Note: High humidity, low temperatures and poor ventilation will affect dry times.
Recommended Application Tools
- Airless Sprayer: Recommended tip size .017 – .021
- Roller: High quality 1/2” – 3/4” nap
- Brush: Nylon/Polyester blend
Mix thoroughly for 1-3 minutes. Prior to use, mechanically shake or mix with a drill powered paint mixer.
Prior to applying ECOBOND® OdorDefender™ it is important that the substrate be thoroughly cleaned and dry. ECOBOND® OdorDefender™ has superior adhesion on most properly prepared substrates. Apply when air and surface temperatures are between 50°-90° F and 10% to 60% relative humidity. Use a high quality 3/8-3/4” nap roller cover, nylon/polyester brush, or an airless sprayer (recommended tip size: .017-.021). Standard application is 1 – 2 coats at 6 wet mils each. For stronger odors another coat may be applied. Allow paint to dry to the touch prior to applying each coat.
Wash hands and tools with water. Clean up spills immediately with water.
Store in a dry place at temperatures between 50°F (4.5°C) and 90°F (32°C).
Dispose of all waste in accordance too local, state and federal regulations.