Sold in 1 & 5 Gallons
Smoke Odor Eliminator
Odor Blocking Paint
ECOBOND® OdorDefender® is a professional-grade, eco-friendly, odor-blocking paint. It is specially designed for absorbing, sealing, and blocking, dangerous odors and lingering fumes from existing cigarette, marijuana, fire, pet odors, and numerous other indoor air pollutants.
The unique blend of food-grade mineral additives, alginates from seaweed, and high-quality acrylic paint provide an excellent vapor barrier for the prevention of moisture and odor transference.
Designed to seal, block & absorb unwanted odors and fumes from:
Pesky Pet Odors
Other day-to-day house & air pollutants
High Odor Blocking Capabilities
Eco-friendly with very Low VOC’s
Excellent Absorption – Alginates from Seaweed
May Be Used as a Primer or Top Coat
Easy to Apply Using Any Method (roller, brush, sprayer)
Mold and Mildew Resistant
High Quality Paint – Provides good hiding
High Coverage Rate
Tintable up to 4 oz. using a universal or water based colorant
So much more than just a paint!
Protects against toxic fumes & smoke
High Quality Paint – provides good hiding
Works best on:
Various wood species
Works best for:
Directions For Use
Mixing Mix thoroughly for 1-3 minutes. Prior to use, mechanically shake or mix with a drill powered paint mixer.
Application Prior to applying ECOBOND® OdorDefender® it is important that the substrate be thoroughly cleaned and dry. ECOBOND® OdorDefender® has superior adhesion on most properly prepared substrates. Apply when air and surface temperatures are between 50°-90° F and 10% to 60% relative humidity. Use a high quality 3/8-3/4” nap roller cover, nylon/polyester brush, or an airless sprayer (recommended tip size: .017-.021). Standard application is 1 – 2 coats at 6 wet mils each. For stronger odors another coat may be applied. Allow paint to dry to the touch prior to applying each coat.
Recommended Application Tool
Airless Sprayer: Recommended tip size .017 – .021
Roller: High quality 1/2” – 3/4” nap
Brush: Nylon/Polyester blend
300-400 sf/gl depending on surface texture, porosity and application method. Note: Recommended film thickness for single coat is 4-6 mil wet for typical application. Additional layers may be required for stronger odors/fumes.
Drying Times (@70-77°F, 50% RH)
To the Touch – 2-4 Hours
To Re-coat/Topcoat – 4 Hours
Note: High humidity, low temperatures and poor ventilation will affect dry times.
Clean-up Wash hands and tools with water. Clean up spills immediately with water.
Storage Store in a dry place at temperatures between 50°F (4.5°C) and 90°F (32°C).
Disposal Dispose of all waste in accordance too local, state and federal regulations.